Instruction manual

26
SAVE AND LOAD
BUTTONS
The Save and Load buttons enable you to save and load several
different scanner settings. These saved settings are very useful
when you are scanning a series of images that were taken under
similar photographic conditions.
1. SAVE
Click SAVE. A dialog box will appear. Enter the file name and
choose a location to save the file; then click Save.
2. LOAD
Click LOAD. A dialog box will appear. Select the settings file you
want to use and click Open.
FLUORESCENT LAMP
AUTOMATIC SHUT OFF
The fluorescent light source automatically turns off if the
Macintosh has not been operated for two hours.
• The lamp will come on again the next time youuse
QuickScan35.
The setting-up takes
approximately 30 - 60 seconds
before the flourescent lamp
glows again.