User manual

Network Settings

3-24 Pi3505e Printer Driver

Configuring NetWare 5.x Novell Distributed Print Service (NDPS)

Settings

✎

Note

Before configuring NDPS-related settings, make sure that an NDPS

Broker and NDPS Manager have been created and loaded.

Before starting this procedure, check to make sure that the NetWare

server is configured with TCP/IP protocol, that the controller has been

configured with an IP address, and that the controller is running.

Creating an NDPS printer agent

1 Log in with Admin privileges.

2 Start up NWadmin.

3 Right-click the name of the organization or department container

where you want to create the Printer Agent, and then select NDPS

Printer.

4 In the NDPS Printer Name field, input the printer name.

5 In the Printer Agent Source field, select Create New Printer Agent,

and then click Create.

6 Check the printer agent name, browse for the NDPS Manager in the

NDPS Manager Name field.

7 Under Gateway Types, select Novell Printer Gateway.

8 On the Novell DPS Settings window, select ((None)) for the printer

and Novell Port Handler for the port handler.

9 On the Connection Type window, select Remote Printer LPR/

TCPIP.

10 Input the IP address assigned to the control as the host address and

Print for the printer name, and then click Finish.

11 On the printer driver registration screen that appears, select None for

each OS, and finalize the registration.