User manual

3
Network Settings
3-22 Pi3505e Printer Driver
Configuring NetWare 5.x NDS Print Server Mode settings
✎
Note
In order to use the print server mode, you need load IPX protocol on
to the NetWare server.
1 Log in with Admin privileges.
2 Start up NWadmin.
3 Select the organization or department container that will perform print
services, and then select Print Service Quick Setup (Non-NDPS) on
the Tools menu.
4 Enter data for Print Server Name, Printer Name, Print Queue
Name, and Volume Name, specify Other/Undefined for the printer
Type Name, and then save the settings.
❍ For information about configuring settings for queue user
privileges, printer alert options, multiple queues, and passwords,
see NetWare documentation.
5 Start up PageScope Light and log in to the Admin mode. On the
Network tab, select Common Settings and then NetWare. Configure
the settings described below. For more information, see “Using
PageScope Light” on page 3-26.
6 Load MONITOR.NLM onto the NetWare Server console.