User manual

Network Settings

Pi3505e Printer Driver 3-21

NetWare 4.x support two operational modes: NDS and bindery

emulation.

* Changes in these settings do not go into effect until you turn the machine off and then back

on again.

✎

Note

Before trying to use bindery emulation, use the NetWare Server to

make sure that bindery emulation is enabled.

Enable Netware*: Yes

Frame Type*: Auto Detect (Select the frame type in accordance with your

network environment.)

Bindery/NDS: NDS

Print Server Name: Name of print server created in step 4

Print Server Password: Use this setting only when configuring settings on the NetWare

Server.

Preferred NDS Context

Name:

Name of context loaded by the Pserver

Preferred NDS Tree

Name:

Name of tree loaded by the Pserver

Print Queue Scan Rate: 1 (Change in accordance with needs.)

Mode*: Nprinter/Rprinter

Printer Number*: 255 Specify the number assigned to the printer (0 to 255) or

255.