User manual

3
Network Settings
3-20 Pi3505e Printer Driver
Configuring NetWare 4.x NDS Remote Printer Mode settings
1 Log in with Admin privileges.
2 Start up NWadmin.
3 Select the organization or department container that will perform print
services, and then select Print Service Quick Setup on the Tools
menu.
4 Enter data for Print Server Name, Printer Name, Print Queue
Name, and Volume Name, specify Other/Undefined for the printer
Type Name, and then save the settings.
❍ For information about configuring settings for queue user
privileges, printer alert options, multiple queues, and passwords,
see NetWare documentation.
5 Start up PageScope Light and log in to the Admin mode. On the
Network tab, select Common Settings and then NetWare. Configure
the settings described below. For more information, see “Using
PageScope Light” on page 3-26.
6 Load PSERVER.NLM onto the NetWare Server console.
7 At the NetWare Server console, display the print server screen, and
confirm that Pi3505e (the printer you created) is shown for Printer 0
and that it shows Waiting for job.