User manual

Network Settings
3
Pi3505e Printer Driver 3-19
7 Select the connection information. In the active connection field, check
to make sure that the Pserver you created is connected.
* Changes in these settings do not go into effect until you turn the machine off and then back
on again.
Enable Netware*: Yes
Frame Type*: Auto Detect (Select the frame type in accordance with your
network environment.)
Bindery/NDS: NDS
Print Server Name: Name of print server created in step 4
Print Server Password: Use this setting only when configuring settings on the NetWare
Server.
Preferred NDS Context
Name:
Name of context that connects Pserver
Preferred NDS Tree
Name:
Name of tree that Pserver logs in to
Print Queue Scan Rate: 1 (Change in accordance with needs.)
Mode*: Pserver