User manual

Network Settings

Pi3505e Printer Driver 3-17

18 Click Insert to display the Available Queues list for the printer.

19 Select the queue you created in step 4, specify a priority value in the

range of 1 (highest) to 10 (lowest), and then click Enter.

20 Click Esc to quit Pconsole.

21 Load PSERVER.NLM onto the NetWare Server console.

❍ For information about configuring settings for queue user

privileges, printer alert options, multiple queues, and passwords,

see NetWare documentation.

22 Start up PageScope Light and log in to the Admin mode. On the

Network tab, select Common Settings and then NetWare. Configure

the settings described below. For more information, see “Using

PageScope Light” on page 3-26.

23 At the NetWare Server console, display the print server screen, and

confirm that Pi3505e (the printer you created) is shown for Printer 0

and that it shows Waiting for job.

Enable Netware*: Yes

Frame Type*: Auto Detect (Select the frame type in accordance with your

network environment.)

Bindery/NDS: Bindery

Print Server Name: Name of print server created in step 7