User manual

Network Settings
3
Pi3505e Printer Driver 3-13
13 If the test prints normally, complete the procedure by clicking OK to
close the Properties dialog box.
After you finish installing a printer with the above procedure, you can use
it just as you would any standard local printer. The printer can also be
used as a network printer by other Windows computers on your network
whose Windows 2000/XP systems are configured the same way as
described above.
3.7 NetWare Printing
This section explains how to print with NetWare.
Configuring Print Settings on a PC Used for Printing
The controller supports the system environment described below.
Configuring NetWare 3.2 Print Server Mode settings
1 Log in with Supervisor rights to the NetWare server that is registered
at the Pserver.
2 Start up Pconsole.
3 From the Available Options, select Print Queue Information, and
then click Enter.
4 Click Insert, input the Print Queue Name, and then click Enter.
5 Click Esc to return to the Available Options.
6 Select Print Server Information, and then click Enter.
7 Click Insert, input the print server name into New Queue Name, and
then click Enter.
8 Select the print server you just created, and then click Enter to display
the Print Server Information menu.
NetWare Version Protocol Emulation Service Mode
NetWare 3.2 IPX Bindery Pserver/Rprinter
NetWare 4.x IPX NDS Pserver/Nprinter
NetWare 5.x
NetWare 6
IPX NDS Pserver
TCP/IP NDPS(lpr)