User manual

3
Network Settings
3-12 Pi3505e Printer Driver
Installing the printer
1 For Windows 2000, on the Start menu, point to Settings and then
click Printers.
❍ For Windows XP, on the Start menu, click Printers and Faxes.
2 For Windows 2000, double-click the Add Printer icon to start the Add
Printer Wizard.
❍ For Windows XP, click the Add Printer icon to start the Add Printer
Wizard.
3 Click Next on the introduction page of the wizard.
4 On the Local or Network Printer page, select the Network printer
option, and then click Next.
5 On the Locate Your Printer page, select the Connect to a printer on
the Internet or your intranet option.
6 Type the IPP printer’s URL into the URL field as shown below, and
then click Next.
http://<IP address of the controller>/ipp
(Example) When the IP address of the Digital Copier is 192.9.200.200:
http://192.9.200.200/ipp
7 Click OK on the confirmation dialog box that appears.
8 In the Manufacturers and Printers lists, select the printer you want to
use, and then click OK.
❍ If the name of the printer you want to use does not appear in the
lists, load the Printer Drivers CD-ROM that comes with your Digital
Copier into your computer’s CD-ROM drive and then click the
Have Disk button. Next, specify the location of the printer’s INF file
on the CD-ROM.
9 Select whether you use this printer as the default printer or not, and
then click Next.
10 Click Finish to exit the wizard.
11 Click the icon of the newly added printer to select it, and then click
Properties on the File menu.
12 Display the General tab and then print a test page.