User manual

Network Settings
3
Pi3505e Printer Driver 3-11
3.6 IPP Printing
This section explains how to use the Windows 2000/XP standard IPP
printing function.
Requirements
G Computer must have TCP/IP installed and enabled.
G Network Card must have valid IP parameters assigned.
Configuration Procedure
1 Install TCP/IP under Windows 2000/XP.
❍ Refer to the applicable Windows documentation for more
information.
2 Assign the IP parameters.
❍ See “Specifying the IP Address From the Copier’s Touch Panel” on
page 3-2 for more information.
3 Use the procedure below to install the printer.
Digital Copier
Network Card
TCP/IP
Windows 2000/XP
TCP/IP
IPP Client