User manual

3
Network Settings
3-10 Pi3505e Printer Driver
Configuring Printer Driver Settings (Windows 98/Me)
1 On the Start menu, point to Settings, and then click Printers.
2 Select the icon of the printer you want to configure, right-click the icon,
and then select Properties from the shortcut menu that appears.
3 On the General tab, click Add Port.
4 Select Network, and then click the Browse button.
5 On the network configuration that appears, click the icon of the
applicable printer.
Configuring printer driver settings (Windows NT4.0/2000/XP)
1 On the Start menu, point to Settings, and then click Printers.
2 Select the icon of the printer you want to configure, right-click the icon,
and then select Properties from the shortcut menu that appears.
3 Click the Ports tab and then click Add Port.
4 Input the following into Local Port: //NetBIOS name/Printing
Service name.
❍ The NetBIOS name and Printing Service name you should input
here are the names that are shown on the PageScope Light
Network tab under Common Settings - Windows.