User manual

Network Settings
3
Pi3505e Printer Driver 3-9
3.5 Windows Printing
This section explains how to use Windows Printing Service for direct
printing on a Microsoft network.
Requirements
G Computer must have NetBEUI protocol installed.
Configuring the controller
You need to perform the following PageScope Light procedure to
configure the controller for Windows printing.
1 Start up PageScope Light.
❍ See “Using PageScope Light” on page 3-26.
2 Input the correct password and log in to the Admin mode.
3 Click the Network tab, and then select Common Settings and then
Windows.
4 Configure the settings described below.
* Changes in these settings do not go into effect until you turn the machine off and then back
on again.
Enable Windows Printing
Service:
Turns Windows Printing Service on or off.
NetBios Name* Specifies the NetBIOS name (up to 15 characters).
Printing Service Name* Specifies the Printing Service name (up to 13 characters).
WorkGroup Name Specifies the work group name (up to 15 characters).