User`s guide

Maintaining the printer
8
8-5
10
Close the top cover and press it
down gently but firmly until it locks
into place.
Resetting the counter for the toner cartridge
After you have replaced the toner cartridge, reset the counter for the toner
cartridge.
1
Turn off the printer.
2
While holding down the panel button, turn on the printer.
The green “Ready” indicator begins to blink.
3
Continue holding down the panel button, and the green “Ready” indi-
cator starts to blink.
4
After the green “Ready” indicator has blinked for about 5 seconds, re-
lease the panel button.
Both indicators begin to blink.
5
After confirming that both indicators are blinking, press and hold down
the panel button again for at least 5 seconds.
Both indicators light up for about 5 seconds, and then both indicators
begin to blink again.
The counter for the toner cartridge has now been reset.
6
Turn the printer off and then on again.
Once the green “Ready” indicator remains on, the printer is again in
Stand-by mode.