User`s guide

3
Installing the printer driver
3-16
3.7 Installing the printer driver under Windows 95
To install the printer driver using the Installer under Windows 95
The CD-ROM that came with your printer starts automatically after being
loaded into the CD-ROM drive of your PC. You are guided step-by-step
through the installation procedure.
1
With Windows running, insert the CD-ROM in the CD-ROM drive of
your PC.
The installation program starts automatically.
?
What if the installation program does not start up automatically?
➜ In Windows Explorer browse to the CD-ROM directory. Then
double-click “setup.exe” to start the installation program.
2
Follow the instructions for the installation program.
Once the printer driver has been successfully installed, the
“MINOLTA-QMS PagePro 1250W” printer icon displays in the Printers
dialog box.
3
Remove the CD-ROM from your PC’s CD-ROM drive. This completes
the installation of the printer driver.
To install the printer driver using Plug-and-Play under Windows 95
For a simple way of installing the printer driver, we recommend using the
Installer (see the previous section). However, there are other ways of
installing the printer driver without using the Installer.
This section describes Plug-and-Play installation with a parallel
connection. Windows 95 does not support USB connections.
1
After connecting the printer to your PC with the parallel cable, turn on
the printer.
2
Turn on the PC. After Windows starts, the Update Device Driver
Wizard dialog box displays.
3
Insert the CD-ROM that came with your printer into your PC’s CD-
ROM drive, and then choose [Next].
4 Choose [Other Locations], and then choose [Browse].
5
Browse the CD-ROM and navigate to “Win9x.”
6 Choose [OK].