User`s guide

Installing the printer driver
3
3-13
3.6 Installing the USB device driver and printer driver
under Windows 98
When connecting the printer to your PC with a USB cable, install the USB
device driver according to the following instructions before installing the
printer driver.
If you have connected the printer to your PC with a parallel cable, skip to
the following section, “To install the printer driver using the Installer under
Windows 98,” on page 3-14.
To install the USB device driver under Windows 98
1
Turn on your PC.
2
Turn on the printer.
3
When Windows and the printer are both ready, insert the CD-ROM
that came with your printer into your PC’s CD-ROM drive.
4
Connect the printer to the PC with the USB cable (see chapter 2) to
display the Add New Hardware Wizard dialog box.
5
Choose [Next] to display the next dialog box.
6
Check the “Search for the best driver for your device.
(Recommended).” option button, and then choose [Next].
7
When the next dialog box appears, check the “Specify a location” box,
and then choose [Browse...].
8
Browse the CD-ROM and navigate to “Win98USB.”
9
Choose [OK].
10
Follow the instructions on the screen to complete the installation.
11
Choose [Finish] to finish the installation.
12
This completes the installation of the USB device driver for the
PagePro 1250W printer. Now go to the following section to install the
printer driver.