User`s guide

Installing the printer driver
3
3-11
To install the printer driver using Plug-and-Play under Windows 2000
For a simple way of installing the printer driver, we recommend using the
Installer (see the previous section). However, there are other ways of
installing the printer driver without using the installer. This section
describes Plug-and-Play installation.
3
Insert the CD-ROM that came with your printer into your PC’s CD-
ROM drive, and then choose [Next].
4 Check the “Display a list of the known drivers for this device so that I
can choose a specific driver” option button, and then choose [Next].
5 Choose “Printers,” and then choose [Next].
6
Choose [Have Disk...], and then choose [Browse...].
7
Browse theCD-ROM and navigate to “Win2000.”
8 Choose [Open].
9
Choose [OK], and then choose [Next].
10
Follow the instructions on the screen to complete the installation.
11
Check that the “MINOLTA-QMS PagePro 1250W” printer icon is dis-
played in the Printers dialog box.
12
Remove the CD-ROM from your PC’s CD-ROM drive. This completes
the installation of the printer driver.
Parallel USB
1
After connecting the printer to
your PC with the parallel cable,
turn on the printer.
1
Turn on the PC, and then turn on
the printer.
2 Turn on the PC. After Windows
starts, the Found New Hardware
Wizard dialog displays.
2 When Windows and the printer
are both ready, connect the
printer to the PC with the USB
cable (see chapter 2). The
Found New Hardware Wizard
dialog box displays.