User`s guide

Installing the printer driver
3
3-9
3.5 Installing the USB device driver and printer driver
under Windows 2000
When connecting the printer to your PC with a USB cable, install the USB
device driver according to the following instructions before installing the
printer driver.
If you have connected the printer to your PC with a parallel cable, skip to
the following section, “To install the printer driver using the Installer under
Windows 2000,” on page 3-10.
To install the USB device driver under Windows 2000
If the printer is connected to the computer using a USB cable, USB
Printing Support may automatically be incorporated, depending on the
operating system. In order to activate all functions of the PagePro 1250W,
the USB device driver for PagePro 1250W must be installed.
Install the USB device driver for PagePro 1250W according to the
following procedure.
1
Turn on your PC.
2
Turn on the printer.
3
When Windows and the printer are both ready, insert the CD-ROM
that came with your printer into your PC’s CD-ROM drive.
4
Connect the printer to the PC with the USB cable (see chapter 2) to
display the Found New Hardware Wizard dialog box.
5
Choose [Cancel] to close the Found New Hardware Wizard dialog
box.
6
Right-click the “My Computer” icon on the desktop, and then choose
“Properties” in the shortcut menu that appears. The System Properties
dialog box displays.
7
Choose the “Hardware” tab of the System Properties dialog, and then
choose the [Device Manager...] button.
8
Under “Universal Serial Bus controllers” double-click “USB Printing
Support.” The USB Printing Support Properties dialog box displays.
9
Chose the “Driver” tab of the USB Printing Support Properties dialog
box, and then choose [Update Driver...].
10 Choose [Next] to display the next dialog box.