User`s guide

Installing the printer driver
3
3-5
To install the printer driver using the Add Printer Wizard under
Windows XP
1
Turn on the PC.
2
After Windows starts, insert the CD-ROM that came with your printer
into your PC’s CD-ROM drive.
3
Choose [start], and then choose “Control Panel.”
4
In “Pick a category” choose “Printers and Other Hardware.”
5 In “Pick a task” choose [Add a printer].
6
Choose [Next].
7
Select “Local printer attached to this computer.”
❍ Do not check the “Automatically detect and install my Plug and
Play printer” box.
8
Choose [Next].
9
Choose the “Use the following port:” button, select the port you want
to use, and then choose [Next].
If you are using a parallel connection, select “LPTx:” (x=1, 2, etc.).
If you are using a USB connection, select “USB001.”
10
Choose [Have Disk], and then choose [Browse].
11
Browse the CD-ROM and navigate to “Win2000.”
12
Choose [Open].
13 Choose [OK], and then choose [Next].
14
Follow the instructions on the screen to complete the installation.
15
Check that the “MINOLTA-QMS PagePro 1250W” printer icon is dis-
played in the Printers dialog box.
16
Remove the CD-ROM from your PC’s CD-ROM drive. This completes
the installation of the printer driver.