User`s guide

Driver Settings: Windows NT 4.0
3-30
Printer Driver and Status Display
Chapter 3
• Auto*
1
• Tray1 (Envelope)
• Tray1 • Tray2 (Transparent)
• Tray2 • Tray3 (Transparent)
• Tray3 (option) • Manual (Transparent)
• Manual*
2
• Manual (Thick paper)
• Tray1 (Transparent) • Manual (Envelope)
• Tray1 (Thick paper)
*1: Auto
• The printer automatically selects the size of paper that is speci-
fied in the Paper Size setting from either Tray2 or Tray3.
• When Auto is selected and either Tray2 or Tray3 runs out of
paper, the printer will automatically go to the next tray if it con-
tains the same size and type of paper.
Note
*2: Manual
The manual feed mode allows you to review each output document by
feeding individual sheets, one at a time, into the printer.
When manual is selected, the “wait action” message will be
displayed. Printing will take place when a piece of paper is set onto
Tray1 and the Action key is pressed.
Default
Click the Default button to reset the functions of the tab to their
original values.
• Tray1 does not support the Auto mode, nor is it selected during auto tray
switching.