User`s guide

3
Installing the printer driver
3-24
To install the printer driver using Plug-and-Play under Windows 98
For a simple way of installing the printer driver, we recommend using the
Installer (see the previous section). However, there are other ways of
installing the printer driver without using the Installer.
This section describes Plug-and-Play installation with a parallel
connection.
1
After connecting the printer to your PC with the parallel cable, turn on
the printer.
2
Turn on the PC. After Windows starts, the Add New Hardware Wizard
dialog box displays.
3
Insert the CD-ROM that came with your printer into your PC’s CD-
ROM drive, and then choose [Next].
4 Choose the “Search for the best driver for your device.
(Recommended).” button, and then choose [Next].
5
Check the “Specify a location:” box, and then choose [Browse...].
6 Browse the CD-ROM and navigate to “\Drivers\language\Win9x.”
7
Choose [OK], and then choose [Next] twice.
8
Follow the instructions on the screen to complete the installation.