User`s guide

Installing the printer driver
3
3-11
16
Remove the CD-ROM from your PC’s CD-ROM drive. This completes
the installation of the printer driver.
3.4 Installing the USB device driver and printer driver
under Windows Me
When connecting the printer to your PC with a USB cable, install the USB
device driver according to the following instructions before installing the
printer driver.
If you have connected the printer to your PC with a parallel cable, skip to
the following section, “To install the printer driver using the Installer under
Windows Me,” on page 3-12.
To install the USB device driver under Windows Me
1
Turn on your PC.
2
Turn on the printer.
3
When Windows and the printer are both ready, insert the CD-ROM
that came with your printer into your PC’s CD-ROM drive.
4
Connect the printer to the PC with the USB cable (see chapter 2) to
display the Add New Hardware Wizard dialog box.
5
Check the “Specify the location of the driver (Advanced)” option
button, and then choose [Next].