User`s guide

Installing the printer driver
3
3-7
1
With Windows running, insert the CD-ROM in the CD-ROM drive of
your PC.
The installation program starts automatically.
?
What if the installation program does not start up automatically?
➜ Browse to the CD-ROM directory. Then double-click “setup.exe” to
start the installation program.
2
Follow the instructions for the installation program.
Once the printer driver has been successfully installed, the
“MINOLTA-QMS PagePro 1200W” printer icon displays in the Printers
dialog box.
3 Remove the CD-ROM from your PC’s CD-ROM drive. This completes
the installation of the printer driver.
To install the printer driver using Plug-and-Play under Windows XP
For a simple way of installing the printer driver, we recommend using the
Installer (see the previous section). However, there are other ways of
installing the printer driver without using the installer. This section
describes Plug-and-Play installation.
3
Insert the CD-ROM that came with your printer into your PC’s CD-
ROM drive, and then choose [Next].Check the “Install from a list or
specific location (Advanced)” option button, and then click [Next].
Parallel USB
1
After connecting the printer to
your PC with the parallel cable,
turn on the printer.
1
Turn on the PC, and then turn on
the printer.
2
Turn on the PC. After Windows
starts, the Found New Hardware
Wizard dialog displays.
2
When Windows and the printer
are both ready, connect the
printer to the PC with the USB
cable (see chapter 2). The
Found New Hardware Wizard
dialog box displays.