User`s guide

Installing and setting up the printer
2
2-11
Turning the printer on and off
✎
Note
Improper handling may damage the printer!
- Never turn off the printer while a print job is in progress, the printer is
receiving data from the computer (blinking green “Ready” indicator on
control panel), or the printer is being reset.
➜ Set the power switch to the “I” (ON)
position to turn on the printer.
The printer is ready to use in ap-
proximately 20 seconds. The green
“Ready” indicator should be on (but
not blinking) and the orange “Error”
indicator off.
➜ Set the power switch to the
“O” (OFF) position to turn off the
printer.
✎
Saving energy is sensible!
When the printer has been inactive for 15 minutes, it automatically
switches to the POWER SAVE mode. When the printer receives a new
print job while in POWER SAVE mode, it automatically switches to the
warmup phase and is ready to print within approximately 7 seconds.