User`s guide

9
Troubleshooting
9-12
Status message
Status messages indicate the current condition of the printer.
Error messages
These messages indicate errors which you must correct before a print job
can continue or the printer status returned to “Ready.”
Ready indicator
(green)
Error indicator
(orange)
Condition Action
Off Off Off None
On Off Ready to print None
Rapid blinking Off Warming up None
Blinking Off Receiving data None
Processing data
Printing
On On Initializing None
Cancelling a print job
Resetting a counter
Slow blinking Off Power save mode None
Rapid blinking Rapid blinking Reset mode None
Ready indicator
(green)
Error indicator
(orange)
Condition Action
Blinking Blinking Memory overflow or print
job is too complex.
If the “Auto Continue”
function has been
activated in the printer
tools, the sheet already
fed in is automatically
ejected after a
predetermined time. (See
chapter 6.)
Reduce the size of the
print job.
Rapid blinking alternately No media in the tray
specified in the printer
driver.
Load media into the
appropriate tray.
Media size error Load the appropriate size
media into the tray.
Off Slow blinking Tray empty Load media into the
appropriate tray.
Off Blinking Media jam Clear the jam and then
continue with the print job.
Off On Top cover is open Close the top cover