Instruction manual

Press the spot/AE lock button to test fire the accessory flash.

FLASH – Wireless/Remote Flash

3. Press the shutter-release

button all the way down to

take the picture.

2. Wait until both flash units are

fully charged.

• appears in the viewfinder when the built-

in flash is charged.

• When the off-camera flash is charged, its

AF illuminator will blink.

Press the flash-mode button when taking the picture. Both flashes

will fire when the shutter is release at a 2:1 ratio. The built-in flash

will provide 1/3 and the accessory flash will provide 2/3 of the total

exposure.

1. Attach the accessory flash to

the camera, then turn the

flash on.

2. Turn the function dial to WL.

3. Press the function button and

turn the control dial until WL

and OFF appear in the

camera’s data panel.

4. Detach the accessory flash.

Cancelling Wireless/Remote Flash Mode

Wireless/Remote Ratio Flash

CAUTION: Set CUSt – 8 (Spot/AE Lock) to setting 1

when Wireless/Remote flash mode is on. If

setting 2 is selected, test firing the flash will

activate slow-shutter sync (p80).