Instruction manual

FLASH – Wireless/Remote Flash

2. Turn the function dial to WL.

3. Press the function button and

turn the control dial until WL

and On appear in the camera’s

data panel.

1. Attach the accessory flash to

the camera, then turn the

camera and the flash on.

4. Detach the accessory flash,

then press the camera’s flash

mode button to raise the built-

in flash.

Setting Wireless/Remote Flash Mode Taking Pictures in Wireless/Remote Flash Mode

The off-camera flash will provide all of the exposure.

1. Position your camera and 3500xi flash unit using the

information on this page.

• If you are not using the 3500xi flash, refer to your flash instruction manual for

the correct camera to subject and flash to subject distances.

Aperture Camera – Subject Distance 3500xi – Subject Distance

f/2.8 1.4 – 5.0m (4.6 – 16 ft.) 1.0 – 5.0m (3.3 – 16 ft.)

f/4.0 1.0 – 5.0m (3.3 – 16 ft.) 0.7 – 4.5m (2.3 – 14.5 ft.)

f/5.6 1.0 – 5.0m (3.3 – 16 ft.) 0.5 – 3.2m (2.3 – 10.5 ft.)

• Calculated for ISO 100 film only.

Continued on next page.