Instruction manual

5150
WIRELESS/REMOTE FLASH
Telephoto
Positioning for Wireless/Remote Flash Mode
Position your camera and 3500xi flash unit using the
information on this page.
• If you are not using the 3500xi flash, refer to your flash instruction
manual for the correct camera to subject and flash to subject distances.
ISO 100
ISO 400
1.0 ~ 5.0m
(3.3 ~16.4ft.)
2.0 ~ 5.0m
(6.6 ~16.4ft.)
1.0 ~ 5.0m
(3.3 ~ 16.4ft.)
0.7 ~ 4.5m
(2.3 ~14.8ft)
1.0 ~ 5.0m
(3.3 ~ 16.4ft.)
1.4 ~ 5.0m
(4.6 ~16.4ft.)
0.5 ~ 3.2m
(1.6 ~ 10.5ft)
1.4 ~ 5.0m
(4.6 ~ 16.4ft.)
Wide Angle TelephotoWide angle
Camera - Subject Distance
3500xi - Subject Distance
Film speed
• Chart data obtained using a 35-80mm f/4-5.6 AF lens.
1. Attach the accessory flash to
the camera.
Cancelling Wireless/Remote Flash Mode
The off-camera flash may not
detect the control signals if it is
placed behind the subject
3500xi-Subject Distance
Camera-Subject
Distance
The maximum flash -subject distance
for the 3500xi is 5.0m (16.4ft).
6. Press the shutter-release button all the way down to
take the picture.
2. Press the flash mode button
until WL no longer appears in
the data panel.
• You can also cancel the wireless/remote flash by turning the main switch
to ON with the accessory flash attached.