Installation guide
Table Of Contents
- Contents
- Getting Acquainted with Your Printer
- Documentation Set
- Setting up Your Printer
- Plugging in/Turning on the Printer
- About the Control Panel
- Configuration Menu Overview
- Connecting the Printer
- Installing Printer Drivers and Software
- Troubleshooting
- Accessories and Consumables
- Regulatory Compliance
- Warranty Considerations
- Manufacturer’s Declaration of Conformity—Europe 220 Volt
- Manufacturer’s Declaration of Conformity—Latin America 110 Volt
- Manufacturer’s Declaration of Conformity—Latin America 220 Volt
Setting up Your Printer
11
English
A fill limit mark is provided on
the inside of the media guides on
the multipurpose tray. The multi-
purpose tray holds 150 sheets of
20 lb bond (75 g/m²) paper.
Attention
Load only one type or size of media per tray at a time.
4
Adjust the media guides to fit the
size media you’re loading.
Attention
Always adjust the media guides after inserting the media. A guide that is not properly
adjusted can cause poor print quality, media jams, or printer damage.
5
Specify the media size in the multipurpose tray in the printer driver.
For further information about loading and using media, refer to chapter 2, “Using Media,”
in the
User’s Guide.
Installing Accessories
If you purchased any printer accessories, then install them now. If installation instructions are
included with the accessory, follow them. If not, instructions are included in the
User’s Guide
.
A complete list is in “Accessories and Consumables” on page 23. Refer to www.minolta-qms.com
or www.q-shop.com for part numbers and pricing.
LTR.
LGL.
EXE.
A4
B5
A5