User Guide
Table Of Contents
- QMS magicolor 2 Print System Operation
- Contents
- Introduction
- Consumables
- Advanced Printing Features
- Color Printing
- Printer Care
- CrownView Printer Web Page
- Media Jams
- Troubleshooting Printer Problems
- Introduction
- Status and Service Messages
- HP-GL Error Codes and PCL Error Codes
- Testing PC-Printer Communication
- Testing Macintosh-Printer Communication
- Printer Problem Checklist
- OPC Belt Cartridge Problems
- Control Panel Problems
- Windows Driver Problems
- CrownNet Problems
- Output Problems
- Kanji Option Kit Problems
- Print Quality Problems
- Color Density Problems
- Image Defects
- Placing a Service Call
- Repacking the Printer
- QMS Customer Support
- Configuration Menu
- Index
Replacing the
OPC Belt
Cartridge
QMS magicolor 2 Op
eration5-18
5 Pull the cartridge straight
up and out of the printer,
and then discard it.
6 Remove the protective sheet
from the cartridge, and then
pull out the two tension-
release pins (one on each
side of the cartridge).
s Caution:
Don’t touch the
green material on the
cartridge. It scratches easily.
7 Holding the cartridge above
the printer, align the guide
pins on the cartridge with
the guide slots in the lock
levers.
The white gear on the
cartridge goes to the right.
8 Gently guide the cartridge
into the printer.
s
Caution: The cartridge should slide easily into the printer. Don’t
force it.