User Guide
Table Of Contents
- QMS magicolor 2 Print System Operation
- Contents
- Introduction
- Consumables
- Advanced Printing Features
- Color Printing
- Printer Care
- CrownView Printer Web Page
- Media Jams
- Troubleshooting Printer Problems
- Introduction
- Status and Service Messages
- HP-GL Error Codes and PCL Error Codes
- Testing PC-Printer Communication
- Testing Macintosh-Printer Communication
- Printer Problem Checklist
- OPC Belt Cartridge Problems
- Control Panel Problems
- Windows Driver Problems
- CrownNet Problems
- Output Problems
- Kanji Option Kit Problems
- Print Quality Problems
- Color Density Problems
- Image Defects
- Placing a Service Call
- Repacking the Printer
- QMS Customer Support
- Configuration Menu
- Index
Replacing the
Fuser Oil Bottle
and Cleaning
Roller
5-15Printer Care
4 Remove the old oil bottle.
s Caution:
Hold a sheet of
paper under the oil bottle while
removing it, so oil doesn’t drip
into the printer.
5 Remove the old cleaning
roller.
6 Lower the new oil bottle into
its slot.
The tab on the side of the bot-
tle must be on the right.