User Guide
Table Of Contents
- QMS magicolor 2 Print System Operation
- Contents
- Introduction
- Consumables
- Advanced Printing Features
- Color Printing
- Printer Care
- CrownView Printer Web Page
- Media Jams
- Troubleshooting Printer Problems
- Introduction
- Status and Service Messages
- HP-GL Error Codes and PCL Error Codes
- Testing PC-Printer Communication
- Testing Macintosh-Printer Communication
- Printer Problem Checklist
- OPC Belt Cartridge Problems
- Control Panel Problems
- Windows Driver Problems
- CrownNet Problems
- Output Problems
- Kanji Option Kit Problems
- Print Quality Problems
- Color Density Problems
- Image Defects
- Placing a Service Call
- Repacking the Printer
- QMS Customer Support
- Configuration Menu
- Index
Replacing the
Fuser Oil Bottle
and Cleaning
Roller
QMS magicolor 2 Op
eration5-14
Replacing the Fuser Oil Bottle
and Cleaning Roller
s Caution:
The fuser unit is an integral part of the imaging process and
is also expensive to replace. Fuser life will be shortened (or the fuser
permanently damaged) if the oil bottle and cleaning roller are not
changed when needed and installed properly. This type of damage is
not covered under warranty or service contract.
M WARNING!
The fuser unit can become extremely hot and cause
severe burns. Make sure the unit is cool before handling it.
ACHTUNG!
Die Fixiereinheit kann sehr heiß werden, so daß
Verbrennungsgefahr besteht. Bitte lassen Sie die Fixiereinheit einige
Zeit abkühlen, bevor Sie diese berühren.
1 Turn off the printer.
2 Open the printer’s top cover.
3 Open the two cleaning roller
lock levers.