User Guide
Table Of Contents
- QMS magicolor 2 Print System Operation
- Contents
- Introduction
- Consumables
- Advanced Printing Features
- Color Printing
- Printer Care
- CrownView Printer Web Page
- Media Jams
- Troubleshooting Printer Problems
- Introduction
- Status and Service Messages
- HP-GL Error Codes and PCL Error Codes
- Testing PC-Printer Communication
- Testing Macintosh-Printer Communication
- Printer Problem Checklist
- OPC Belt Cartridge Problems
- Control Panel Problems
- Windows Driver Problems
- CrownNet Problems
- Output Problems
- Kanji Option Kit Problems
- Print Quality Problems
- Color Density Problems
- Image Defects
- Placing a Service Call
- Repacking the Printer
- QMS Customer Support
- Configuration Menu
- Index
Cleaning the
Printer
QMS magicolor 2 Op
eration5-10
Cleaning the Laser Lens
It’s necessary to clean the laser lens only when you find vertical white
or light-color streaking in all primary colors on your printouts.
» Note:
A dry cotton cloth or dry cotton swab is required for this
procedure.
1 Open the printer’s front cover.
2 Remove the four toner cartridges.
3 Remove the laser lens.
Use the two tabs on top of the
lens.
4 Using a dry cotton cloth, wipe
the lens.
5 Reinstall the laser lens.
It slides in at a 45° angle.
6 Reinstall the four toner car-
tridges.
7 Close the printer’s front cover.