User Guide
Table Of Contents
- QMS magicolor 2 Print System Operation
- Contents
- Introduction
- Consumables
- Advanced Printing Features
- Color Printing
- Printer Care
- CrownView Printer Web Page
- Media Jams
- Troubleshooting Printer Problems
- Introduction
- Status and Service Messages
- HP-GL Error Codes and PCL Error Codes
- Testing PC-Printer Communication
- Testing Macintosh-Printer Communication
- Printer Problem Checklist
- OPC Belt Cartridge Problems
- Control Panel Problems
- Windows Driver Problems
- CrownNet Problems
- Output Problems
- Kanji Option Kit Problems
- Print Quality Problems
- Color Density Problems
- Image Defects
- Placing a Service Call
- Repacking the Printer
- QMS Customer Support
- Configuration Menu
- Index
Replacing a
Toner Cartridge
2-11Consumables
Replacing a Toner Cartridge
Your printer uses four toner cartridges: black, yellow, magenta, and
cyan.
1 Open the printer’s front cover.
2 Remove and discard the empty toner cartridge.
s Caution:
Put the old toner cartridge in a trash receptacle. Do not
dispose of it by burning
3 Remove the toner cartridge
from its shipping carton.
4 Distribute the toner in the
cartridge.
Holding the cartridge with both
hands, gently rock it from side-
to-side five or six times.
5 Pull the tab.
6 Remove the orange protec-
tive cover from the car-
tridge.
PullPull
TabTab