User Guide
Table Of Contents
- QMS magicolor 2 Print System Operation
- Contents
- Introduction
- Consumables
- Advanced Printing Features
- Color Printing
- Printer Care
- CrownView Printer Web Page
- Media Jams
- Troubleshooting Printer Problems
- Introduction
- Status and Service Messages
- HP-GL Error Codes and PCL Error Codes
- Testing PC-Printer Communication
- Testing Macintosh-Printer Communication
- Printer Problem Checklist
- OPC Belt Cartridge Problems
- Control Panel Problems
- Windows Driver Problems
- CrownNet Problems
- Output Problems
- Kanji Option Kit Problems
- Print Quality Problems
- Color Density Problems
- Image Defects
- Placing a Service Call
- Repacking the Printer
- QMS Customer Support
- Configuration Menu
- Index
Prepare the
Fuser Unit
9-7Repacking the Printer
6 Stuff several clean, wadded paper towels into the space nor-
mally occupied by the oil bottle to absorb any residual oil
during shipment.
» Note:
Don’t force the paper towels in, but make sure there are
enough to fill the space.
7 Close the lock levers to secure the cleaning roller.
8 Install the fuser-roller shipping restraints.
These restraints protect the fuser rollers from damage during a
move by removing the pressure between the two rollers. They
must be removed again before printing.
a Open the pressure-release levers (one at each end of the
fuser) to separate the two rollers in the fuser.