User Guide
Table Of Contents
- QMS magicolor 2 Print System Operation
- Contents
- Introduction
- Consumables
- Advanced Printing Features
- Color Printing
- Printer Care
- CrownView Printer Web Page
- Media Jams
- Troubleshooting Printer Problems
- Introduction
- Status and Service Messages
- HP-GL Error Codes and PCL Error Codes
- Testing PC-Printer Communication
- Testing Macintosh-Printer Communication
- Printer Problem Checklist
- OPC Belt Cartridge Problems
- Control Panel Problems
- Windows Driver Problems
- CrownNet Problems
- Output Problems
- Kanji Option Kit Problems
- Print Quality Problems
- Color Density Problems
- Image Defects
- Placing a Service Call
- Repacking the Printer
- QMS Customer Support
- Configuration Menu
- Index
Prepare the
Fuser Unit
QMS magicolor 2 Op
eration9-6
3 Remove the oil bottle.
s Caution:
Hold a sheet of paper under the oil bottle as you remove
it, so no oil drips into the printer.
4 Place the oil bottle in an oil-proof container, such as a plastic
bag, until you’re ready to reinstall it.
5 Use an eye-dropper to remove any excess oil from the fuser.
Dispose of the oil following local safety laws and regulations.