User Guide
Table Of Contents
- QMS magicolor 2 Print System Operation
- Contents
- Introduction
- Consumables
- Advanced Printing Features
- Color Printing
- Printer Care
- CrownView Printer Web Page
- Media Jams
- Troubleshooting Printer Problems
- Introduction
- Status and Service Messages
- HP-GL Error Codes and PCL Error Codes
- Testing PC-Printer Communication
- Testing Macintosh-Printer Communication
- Printer Problem Checklist
- OPC Belt Cartridge Problems
- Control Panel Problems
- Windows Driver Problems
- CrownNet Problems
- Output Problems
- Kanji Option Kit Problems
- Print Quality Problems
- Color Density Problems
- Image Defects
- Placing a Service Call
- Repacking the Printer
- QMS Customer Support
- Configuration Menu
- Index
Remove the
OPC Belt
Cartridge
QMS magicolor 2 Op
eration9-4
1 With the printer’s front and top covers open, rotate up the
lock levers at each end of the OPC belt cartridge slot, and lift
the cartridge out of the printer.
2 Replace the protective sheet around the OPC belt cartridge
and the tension release pin on each side.
Insert the pin until you feel some resistance, move it forward
(toward the silver corona unit), and then slide it in the rest of the
way. The tension-release pins protect the belt and its cleaning
blade by relieving tension during movement.