User Guide
Table Of Contents
- QMS magicolor 2 Print System Operation
- Contents
- Introduction
- Consumables
- Advanced Printing Features
- Color Printing
- Printer Care
- CrownView Printer Web Page
- Media Jams
- Troubleshooting Printer Problems
- Introduction
- Status and Service Messages
- HP-GL Error Codes and PCL Error Codes
- Testing PC-Printer Communication
- Testing Macintosh-Printer Communication
- Printer Problem Checklist
- OPC Belt Cartridge Problems
- Control Panel Problems
- Windows Driver Problems
- CrownNet Problems
- Output Problems
- Kanji Option Kit Problems
- Print Quality Problems
- Color Density Problems
- Image Defects
- Placing a Service Call
- Repacking the Printer
- QMS Customer Support
- Configuration Menu
- Index
Windows Driver
Problems
QMS magicolor 2 Op
eration8-24
Error Handler is a diagnostic tool that identifies PostScript errors
encountered during a print job.
Windows Driver Problems
Printer Description Files
If you experience problems either when installing or using printer
description files on a PC, see “Notes on Installing Printer Description
Files” in chapter 3, “Connecting to a PC,” in the
Getting Started
manual.
CrownNet Problems
If you have trouble installing and setting up your QMS CrownNet inter-
face, check the following:
n If the printer requires a network interface card, is it correctly
installed in the printer?
n Is the printer connected to the network?
n Is the printer plugged in, turned on, and correctly configured?
Menu Administration/Startup Options/Do Error Handler
Choices Yes—Load the Error Handler.
No—Don’t load the Error Handler.
Default No
Notes Refer to the
PostScript Language Reference Manual
(Adobe
Systems Incorporated, Reading, PA: Addison-Wesley, 1990,
ISBN 0-201-18127-4) for information on PostScript errors.
You must reboot the printer after turning on the error handler.