User Guide

Status and
Service Messages
8-5Troubleshooting Printer Problems
ADJUST INPUTBIN BIN The specified cassette is
not inserted correctly.
Adjust the cassette.
INPUTBIN BIN JAM Media has jammed while
being pulled from the
specified cassette.
Clear the jam from
the specified
cassette.
BACK PANEL OPEN The rear cover over the
transfer unit is not closed.
Close the rear
cover.
BELT CARTRIDGE MIS-
INSTALLED
The OPC belt cartridge is
either missing or
incorrectly installed.
Ensure that an
OPC belt cartridge
is correctly
installed.
CANCEL JOB The Cancel key has been
pressed, and one or more
of the print jobs in the
print queue are being
canceled.
Press Select and
the oldest job in the
print queue will be
canceled.
CANCEL ALL JOBS The Cancel key has been
pressed, and one or more
of the print jobs in the
print queue are being
canceled.
Press Select for all
jobs with a printing,
interpreting,
spooled, or
terminating status
to be completely
removed from the
system.
CHECK CLEANING
ROLLER
The cleaning roller needs
to be replaced.
Install a new
cleaning roller.
CHECK WASTE TONER Either the waste toner
pack is full and needs to
be replaced, or it is
incorrectly installed.
Ensure that the
waste toner pack is
not full and is
correctly installed.
CLOSE ENGINE DOOR(S) One or more of the front
or side covers is open and
must be closed.
Close the front or
side covers.
This status message... means... Do this...