User Guide

Removing
Media Jams
7-7Media Jams
3 If the jammed media came
out easily, skip to step
step 7.
If it didn’t come out easily,
open the top cover, and
then open the fuser roller
pressure release levers
(one at each end of the
fuser).
4 Remove the jammed
media by pulling it from
the bottom of the fuser
(through the printer’s rear
cover), not from the top of
the fuser.
This prevents any unfused
toner from dirtying the fuser
rollers.
s Caution: Be careful not to
touch the transfer drum
while removing jammed
media.
5 Close the fuser roller pressure release levers.
6 Close the top cover of the printer.
7 Close the back cover of the printer.
v