Specifications

LIGHTMETERS
MINOLTA
METERS
309
Spherical Diffuser (1509-0584)
For incident reading replace-
ment
Item # MISD.....................
22.95
Reflected Light Attachment
40°
(8038-515)
The Reflected Light
Attachment has a 40° angle
of acceptance which corre-
sponds to the angle of view
seen with 50mm lens on a
35mm SLR camera.
Item # MIRLA40..............
17.95
Flat Diffuser (8034-200)
Used to measure the lighting
ratio between main and auxil-
iary light sources, to determine
illuminance values and to take
exposure readings for flat sur-
faces such as paintings.
Item # MIFD ....................
17.95
Spot Mask (8034-300)
The Spot Mask is an enlarger
attachment so that the meter
can double up as an enlarging
meter. First determine the
aperture setting and exposure
time for a standard negative,
then measure the illumination
using the spot mask. With sub-
sequent negatives, the need for
a test print can be eliminated
by measuring an area on the
negative of similar density to
the metered area on the stan-
dard negative.
Item # MISME..................
22.95
4X Spherical
ND Diffuser
(8034-600)
A 4X Spherical ND Diffuser is
used when the light level is too
bright to be measured by the
standard diffuser. The mea-
surement range is extended by
two f-stops.
Item # MISNDD4 ............
22.95
8X Spherical
ND Diffuser
(8034-650)
For the Flashmeter V only. It is
the same as the 4X Spherical
ND Diffuser, with the
measurement range extended
by 3 f-stops.
Item # MISNDD8 ............
22.95
Mini Receptor (8034-500)
For photomacrogra-
phy and close-up
work, this
remote receptor
plugs into the
socket on the
meter’s
receptor
head. The
Mini Receptor can be used to
measure incident light in places
that are otherwise inaccessible
to the meter’s receptor head.
Item # MIMR.................
124.95
Minolta Accessories for the Auto Meter III, Autometer IV, and Flashmeter V
Miscellaneous Accessories
Booster II Set (8045)
Consists of a Booster II, spot-probe, microscope,
35mm film-plane and SLR eyepiece attachments.
The Booster II is a high-sensitivity receptor that
takes measurements off the focusing screen of a
large-format view camera when the spot-probe
receptor is attached to it. Useful for close-ups and
macrophotographs. Direct readings through the
microscope’s optics are possible. Flash exposures
can be calculated with the Flashmeter. Highly
accurate measurements of flash or ambient light at
the camera’s film plane are possible with the 35mm film-
plane attachment. This method is more accurate than
measurements taken through the SLR eyepiece, because the
Booster II measures the light that actually passes through the
camera lens and strikes the film. The SLR eyepiece attachment enables
taking centered, circular TTL exposure readings through the camera’s lens. This function is important if
you own an SLR camera that does not have a built-in meter. Also useful for taking TTL flash measure-
ments. Requires one 6v, four LR44 or equivalent battery.
Item # MIB2S..........................................................................................................................................234.95
Sync Cord III (8034-910)
For use with the Flashmeter
and Auto Meter IVF, the Sync
Cord III is a 5-meter long cord
that connects to the meter,
flash unit, and camera’s sync
terminal simultaneously, mak-
ing meter-flash and camera-
flash synchronization possible
without changing connections.
Item # MISC3...................
29.95
ViewFinder 5° (8034-156)
With case. The ViewFinder 5°
features a 5° angle of accep-
tance and enables spot meter-
ing of subjects from a distance.
Displayed exposure value must
be adjusted when used with
Autometer III.
Item # MIVF5...................
89.95
ViewFinder 10° II
with Case
(8034-116)
Same as above, featuring a 10° angle of acceptance.
Item # MIVF10.............................................................................
86.95
Spherical
Diffuser
(1509-0584)
Flat
Diffuser
(8034-300)
Reflected Light
Attachment 40°
(8038-515)
Case for
Flashmeter IV and V
(8048-600)
Replacement.
Item # MICFM4
..................38.95
Case for Auto Meter III (8044-600)
Replacement.
Item # MICAM3 ..............
28.50
Case for Auto Meter IVF (8054-600)
Replacement.
Item # MICAM4F............
28.50
Infrared Receiver/Trigger (805-0107)
Item # MIRTIR..............199.95
Data Receiver DR-1000 (805-0207)
Item # MIDR1000..........249.95
Meter Kit Case II (8048-650)
The sturdy Meter Kit Case II
holds a Minolta meter and has
space for a wide variety of
accessories for easier portabili-
ty. With the meter and acces-
sories together, nothing is for-
gotten when going to a shoot.
Please Note: The Sync Cord III
will not fit in this case.
Item # MIMKC2............111.95
Strap for
Flashmeter IV/V,
Auto Meter III and IVF (8044-1051)
Replacement.
Item # MISNAM3..............
5.95
THE PROFESSIONAL’S SOURCE [phone] • FAX: [phone]
1•800•947•6650
PHOTO - VIDEO - PRO AUDIO