Instruction manual

Basic Operation
2928
Basic Operation
4
Press the display-selector
button to set the exposure
display units to FNo. or
EV.
● When the meter is set to display
in EV, FNo. is also displayed on
the analog scale.
5
Press the measuring
button to take readings.
● The meter will continue to take
readings as long as the
measuring button is held down.
As readings are taken, the
results are displayed on the
digital readout in the units set in
step 4. Readings are displayed
on the analog scale at the same
time.
* Display example is the same as the case of a still camera. (Refer to
page 25.)
3
Use the up/down key to
set the frame rate of the
camera you are using.
● Eight frame rates can be set: 8,
12, 16, 18, 24, 25, 30, 32, 64,
and 128 frames/sec. (The
appropriate shutter speed,
corresponding to a shutter
opening of 180°, is set
automatically by the exposure
meter.)
If the opening of your camera's
shutter is not 180°, the film speed
should be adjusted as follows.
Shutter opening and film speed
adjustment
Shutter opening
Film-speed
adjustment
160° -1/3
220° +1/3
-1/3: Set the film speed to 1/3-
stop slower than the film
speed you are using.
(Ex.: ISO 500 to 400)
+1/3: Set the film speed to 1/3-
stop faster than the film
speed you are using.
(Ex.: ISO 500 to 640)
AutoMeter_VF.qxd 02.7.8 1:31 PM ページ 28