Instruction manual

Battery (p. 8)
↓
CINE (p. 13)
↓
Film speed (p. 14)
↓
Incident-light reading and
reflected-light reading (p. 15)
1
Prepare the meter to start
taking readings.
Basic Operation
26 27
Basic Operation
2. With a cine camera
2
In CINE mode, the
measuring mode is fixed
to AMBI.
● Measuring mode cannot be
changed.
If the reading is outside the
measurement range of this meter,
E (error) will be displayed on the
digital readout, and (over) or
(under), and or on the
analog scale, will blink to indicate
that the measurement is out of
range.
Display units are EV
The exposure is displayed in units
of EV (exposure value), regardless
of the shutter speed setting.
Shutter speed, the analog scale
and the pointers along the analog
scale are shown in the same way
as when the meter is set to FNo.
display.
Ex.: The display shows a reading
of 10.2 (EV).
The shutter speed and FNo.
corresponding to the shutter
speed are displayed on the
analog scale.
If the reading is outside the
measurement range of this meter,
E (error) will be displayed on the
digital readout, and (over) or
(under), and or on the
analog scale, will blink to indicate
that the measurement is out of
range.
AutoMeter_VF.qxd 02.7.8 1:31 PM ページ 26