Specifications

2
TECHNICAL HIGHLIGHTS
This copier has the following mechanical features.
◆
The original is aligned at the rear corner, while the copy paper is fed
through the center of the copier.
◆
Three fusing heater lamps are used, which enables the copier to
complete warming up in less than 5 minutes. (For details, see p. M-164.)
◆
All original size detecting sensors are fixed, enhancing measuring
accuracy. (For details, see p. M-54.)
*
The copier becomes capable of detecting both the metric and inch
original sizes when equipped with the optional original size detecting
sensors.
◆
The paper take-up retry control minimizes the occurrence of paper
misfeeds. (For details, see p. M-124.)
The copier has the following control features.
◆
The watchdog (CPU overrun monitor) function monitors the operation of
the CPUs mounted in the copier and, if a CPU overrun is detected, it
automatically resets the faulty CPU, restarting the logic circuit and
mechanism. (For details, see p. M-11.)
◆
The malfunction bypass function minimizes downtime when the copier
develops a malfunction. (For details, see p. M-14.)
◆
The image stabilization system stabilizes the copy image. (For details,
see p. M-16.)
G-2