Specifications

11-5. Original Size Detection
•
Original Size Detecting Board UN2 reads the output data provided by the
original size detecting sensors. By comparing the data from each sensor
with the threshold level, it determines whether there is an original placed
on the Original Glass. UN2 then determines the size of the original
according to the combination of the comparison results.
•
The threshold level is set so that UN2 can determine whether there is an
original or not by compensating for part-to-part variations and variations in
the installed positions of the sensors. This procedure is performed by the
F7 operation.
FD1 FD2 FD3 CD1 CD2
Original Size LED2 LED1 LED2 LED1 LED2 LED1 LED2 LED1
A3L OOOOOOOO
B4L OOOOO
●
O
●
A4L OOO
●
ll
●●
A5L
Invoice:
5-1/2" × 8-1/2"
O
●
●●
ll
●●
A4C O
●●●●
OOO
Letter L: 8-1/2" × 11" O O
●
●●●
●●
11" × 17" OOOOOOO
●
Legal: 8-1/2" × 14" OOOO
O
●●●
FLS: 8-1/2" × 13" OOOO
●
l
●
●
Letter C: 11"×8-1/2" O
●●●
lOO
●
No Original
●●●●
ll
●●
O
: Original Present
●
: Original Not Present
Notes:
•
UN2 does not use the data provided by LED1 of Original Size
Detecting Sensor FD1 (UN5) and LED2 of CD2 (UN7) for the
determination of the original size.
•
Any non-standard size is rounded off to the nearest standard size.
M-59