Specifications

11
ORIGINAL SIZE DETECTING SYSTEM
•
The conventional original size detecting system, which uses the intensity of
the light reflected off the original as the basis for detection, is not 100%
capable of detecting originals with high image density. The new system, on
the other hand, determines the distance between the sensor and the
original and is less affected by the color, reflectivity, paper quality, and
other factors of the original.
•
The adoption of this new system has resulted in the following
improvements.
➀
Higher maximum original image density level that can be detected, up
from a conventional 0.25 to 0.8 according to the manufacturer’s
comparison.
➁
The system is less susceptible to the image density and color of the
original.
➂
The optional sensors enable the detection of originals both of the metric
as well as inch systems.
11-1. Construction
2
1
6
5
8
Original Cover
Detecting Lever
7
Control Panel
4
3
M-54