Specifications

(4) Lens Movements in the X/Y-Direction
◆ When Power Switch is turned ON
(1) The Scanner is returned to the home position, if it is not there. It is at the
home position when Scanner Reference Position Sensor PC1 is blocked.
(2) The Lens is returned to the reference position in the Y-direction.
Lens Y Direction Reference Position Sensor PC3 ... L ➡ H
(3) The Lens is returned to the reference position in the X-direction.
Lens X Direction Reference Position Sensor PC2 ... H ➡ L
(4) The Scanner makes a prescan motion.
(5) Lens drive check in the X-direction.
(6) Lens drive check in the Y-direction.
(7) The Lens moves to the full size position.
Note: Steps (5) and (6) are not performed when the Lower Front Door is
opened and closed (with DC5V being supplied).
M-52