Specifications

∗
C0990, C0991
Step Check Item Result Action
1
Slide out the 3rd Drawer and check the 3rd
Drawer Lift-Up Sensor PC16 as described
below:
 
1) Select "IC Port Data Check".
2) <Metric Areas>
Is the data of PC3 on PWB-F (3MJ)
(IC2F) " "?
(See the 5/8 Screen on T-7.)
<Inch Areas>
Is the data of PC3 on PWB-F (3MC)
(IC2F) " "?
(See the 6/8 Screen on T-7.)
NO
•
Check the Paper Take-Up Roll
Assy.
3) Slide the 3rd Drawer back in to complete
lift-up. (PC16: blocked).
 
4) Select "IC Port Data Check" again.
<Metric Areas>
Has the data of PC3 on PWB-F (3MJ)
(IC2F) changed from " " to " "?
<Inch Areas>
Has the data of PC3 on PWB-F (3MC)
(IC2F) changed from " " to " "?
YES
•
Change PWB-F or PWB-A.
NO
•
Change PC16.
H L
H
H L
H
T-104