Specifications

M5 is energized and deenergized by the output from pin 52 of IC5A on

Master Board PWB-A.

= M5 Energization Timing =

M5 is energized at different timings depending on which drawer the paper is

fed from. Timer value T1, which is the period between the press of the Start

Key and the energization of M5, varies with the paper source as listed

below. This ensures that the PC Drum turns for a given period of time for

each copy cycle regardless of the paper source.

Paper Source T1

1st and 2nd Drawer 5msec

3rd Drawer 290msec

Multi Bypass Table 600msec

= M5 Deenergization Timing =

M5 is deenergized approx. 1,250 msec. after Scanner Control Processor

Board PWB-J has output a SCEND signal.

1075C01MAA

M-26