Specifications

C09
∗∗
(Paper Take-Up Section malfunctions)
* Code Description Detection Timing
* C0914 2nd Drawer Lift-Up
Motor M24’s failure to
turn
* C0916
(Inch
Areas)
2nd Drawer lock release
failure
The 2nd Drawer is not pushed out 10 seconds after the
2nd Drawer Lowered Position Sensor PC50 has been
blocked ( ) during lowering motion.
* C0920 1st Drawer Lift-Up failure
* C0921
(Inch
Areas)
1st Drawer Lower-Down
failure
The 1st Drawer Lift-Up Sensor PC14 is not unblocked
( ) though the 1st Drawer Lift-Up Motor Pulse Sensor
PC56 detects 10 pulses after M23 had started rotating
backward.
•
The 2nd Drawer Lift-Up Motor Pulse Sensor PC57
detects no pulses 500 msec. after M24 had been
energized.
•
The 2nd Drawer Lift-Up Motor Pulse Sensor PC57
detects no pulses for 200 msec. while M24 was being
energized.
•
The 1st Drawer Lift-Up Sensor PC14 is not blocked ( )
5 seconds after the 1st Drawer Lift-Up Motor M23 has
started rotating forward.
•
The 1st Drawer Lift-Up Motor Pulse Sensor PC56
detects 75 pulses after M23 had started rotating forward.
L
L
H
5 sec
H
L
1075T151CA
M23
Forward rotation
PC14
Backward rotation
H
L
PC56
150 count
500
msec
H
L
1075T150CA
ON
PC57
OFF
M24
200
msec
20 count
H
L
1075T152CA
M23
Stop
PC56
Backward rotation
H
L
PC14
T-51