Specifications

<Multi Bypass Misfeed Clearing Procedure>
Symptom Step Check Item Result Action
•
Paper is not
taken up at all. 1
Is the paper fed out of the copier
properly when it is taken up and fed
in from the copier drawer?
NO
Refer to the section on
Copier Take-Up Misfeed.
2
Is the Manual Feed indicator
displayed on the screen when a
sheet of paper is placed on the
Multi Bypass Table.
YES
To Step 4.
3
Check Manual Feed Paper Empty
Sensor PC28.
 
1)
2)
Remove the misfed paper.
Select "IC Port Data Check".
3) Is the data of BPB6 on PWB-A
(IC5A) " " with no paper
placed on the Multi Bypass
Table?
(See the 2/8 screen on T-7.)
NO
Check the operation of
the Actuator.
4) Place a sheet of paper on the
Multi Bypass Table to block
PC28.
 
5) Return to the "I/O Check" menu
screen and select "IC Port Data
Check" again. Has the data of
BPB6 changed from " " to
" "?
YES Change PWB-A.
NO
Change PC28.
4
Does the paper being used meet
product specifications? NO
Instruct the user to use
the paper that meets
product specifications.
5
Is the paper curled, wavy or damp?
YES
Change the paper.
Instruct the user on the
storage of paper.
H
H
L
T-24